Order Products : sales@su-jiao.com

ESENTTIA 03H82

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Polipropileno del Caribe S.A.
Trademark:	ESENTTIA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ra7UZX_ESENTTIA-03H82.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
Characteristics: Homopolymer polypropylene with high cleanness and stable processability, excellent gage control, easy stretching and orientation, low water carry-over. Recommended for: Raffia Tapes for woven fabrics where high tenacity and strength are required, ropes, cords, industrial bags, carpet backing, big bags, general purpose extrusion and injection molding applications.

General Information
Features	Clean/High Purity Food Contact Acceptable General Purpose Good Gauge Control Good Processing Stability Good Stretchability High Strength Homopolymer Low Water Carryover
Uses	Bags Carpet Backing Fabrics General Purpose Industrial Applications Rope Tape
Agency Ratings	EC 1907/2006 (REACH) EC 1935/2004 EC 2023/2006 EU 10/2011 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(b) FDA 21 CFR 177.1520(c) 3.1a
Forms	Pellets
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) ¹(230°C/2.16 kg)	3.4	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²(Yield, 3.20 mm, Injection Molded)	35.9	MPa	ASTM D638
Tensile Elongation ³(Yield, 3.20 mm, Injection Molded)	9.0	%	ASTM D638
Flexural Modulus - 1% Secant ⁴(3.20 mm, Injection Molded)	1650	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm, Injection Molded)	40	J/m	ASTM D256A

Note Message
1 .	Procedure B
2 .	Type I, 50 mm/min
3 .	Type I, 50 mm/min
4 .	Type I, 1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
TECHLEN MR5254	DAEHA Co., LTD	PP, Unspecified	TECHLEN
Nipol® DN003	Zeon Chemicals L.P.	NBR	Nipol®
Novalloy-B B5546 (Type D)	Daicel Polymer Ltd.	ABS+PBT	Novalloy-B
AKROMID® T1 GF 30 black (3466)	AKRO-PLASTIC GmbH	PPA	AKROMID®
Luranyl® HT 220 E	ROMIRA GmbH	PPE+Nylon 66	Luranyl®