Order Products : sales@su-jiao.com
WELLAMID Nylon 6000/58 HWUVCP
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | CP-Polymer-Technik GmbH & Co. KG |
| Trademark: | WELLAMID Nylon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rWgpiB_WELLAMIDNylon600058HWUVCP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
WELLAMID Nylon 6000/58 HWUVCP is a polyamide 6 (nylon 6) material,. This product is available in Europe,. The main features of WELLAMID Nylon 6000/58 HWUVCP are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.06 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ||||
| Transverse flow : 4.00mm | 0.80 - 1.2 | -- | % | |
| Flow : 4.00mm | 0.80 - 1.2 | -- | % | |
| Water Absorption (Saturation, 23°C) | 2.5 - 3.3 | -- | % | DIN 53495 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 2200 | 900 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 50.0 | 35.0 | MPa | ISO 527-2/50 |
| Tensile Strain | ISO 527-2/50 | |||
| Yield | 5.0 | 30 | % | ISO 527-2/50 |
| Fracture | > 50 | > 50 | % | ISO 527-2/50 |
| Flexural Modulus | 1800 | -- | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 50 kJ/m² | No Break | ISO 179 | |
| Charpy Unnotched Impact Strength | ISO 179 | |||
| -40°C | No Break | -- | ISO 179 | |
| 23°C | No Break | No Break | ISO 179 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, not annealed | 100 | -- | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 45.0 | -- | °C | ISO 75-2/A |
| Vicat Softening Temperature | 170 | -- | °C | ISO 306/B50 |
| Melting Temperature | 215 | -- | °C | |
| CLTE - Flow (23 to 80°C) | 9.0E-5 | -- | cm/cm/°C | DIN 53752 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+13 | 1.0E+10 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+12 | ohms·cm | IEC 60093 |
| Dielectric Strength | 32 | 35 | kV/mm | IEC 60243-1 |
| Relative Permittivity (1 MHz) | 3.50 | 6.00 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.024 | 0.25 | IEC 60250 | |
| Comparative Tracking Index | 600 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 1.6 mm | HB | HB | UL 94 | |
| 3.2 mm | HB | HB | UL 94 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 245 - 260 | °C | |
| Mold Temperature | 40 - 80 | °C | |
| Injection Rate | Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD C 1480 | RTP Company | PESU | RTP |
| EverGlide® MB1450 | Polymer Dynamix | PBT | EverGlide® |
| Dugdale PVC Rigid Extrusion White Compound | Dugdale Plc | PVC, Rigid | Dugdale PVC |
| KOPEL® KP3347 | Kolon Plastics, Inc. | TPC-ET | KOPEL® |
| Hylex® P1025L ML | Entec Polymers | PC | Hylex® |
