Order Products : sales@su-jiao.com

Veradel® 3200P

Category:	PESU , Polyethersulfone
Manufacturer:	Solvay Specialty Polymers
Trademark:	Veradel®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	rV294F_Veradel-3200P.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Veradel® 3000P, 3100P, 3200P, 3400P and 3600P are polyethersulfone (PESU) powders for dissolving or dispersing into solutions. They can also be ground to smaller particle size or blended with other solid particles. The grades differ by their molecular weights, with 3000P the highest and 3600P the lowest. There is a direct correlation between molecular weight and solution viscosity.

PESU offers excellent toughness and outstanding hydrolytic resistance. It resists attack from steam, boiling water, and mineral acids. Cast films or coatings of PESU are transparent and have additional desirable properties including long term thermal stability, excellent metal adhesion and formability and inherent flame resistance.

Typical applications include high-temperature coating formulations, membranes, advanced high-temperature composites, and specialty adhesives.

This grade was formerly marketed as Gafone™ PESU

General Information
Features	Acid Resistant Flame Retardant Food Contact Acceptable Good Adhesion Good Chemical Resistance Good Creep Resistance Good Dimensional Stability Good Thermal Stability Good Toughness High Heat Resistance High Tensile Strength Hydrolysis Resistant Medium Flow Medium Molecular Weight Medium Rigidity
Uses	Adhesives Coating Applications Compounding Film Membranes
Agency Ratings	NSF 61 2
RoHS Compliance	Contact Manufacturer
Appearance	Transparent - Slight Yellow
Forms	Granules Powder
Processing Method	Cast Film Coating Solution Processing Spraying

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.37	g/cm³	ASTM D792
Water Absorption (24 hr)	0.60	%	ASTM D570
Solution Viscosity ¹	485	mPa·s	Internal Method
Residual Solvent	0.50	%	Internal Method

Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature	220	°C	ASTM E1356
CLTE - Flow	4.9E-5	cm/cm/°C	ASTM D696

Note Message
1 .	25% in dimethylacetamide at 40°C

Resin Grade	Manufacturer	Category	Trademark
ResMart Repro CoPP 10	ResMart	PP Impact Copolymer	ResMart Repro
BITONER® BT-2104	Qingdao Bater Chemical Co., Ltd.	TP, Unspecified	BITONER®
OmniTech™ HDPE TF10	OMNI Plastics, LLC	HDPE	OmniTech™
NHU-PPS 10200F	Zhejiang NHU Comp. Ltd.	PPS	NHU-PPS
Latiohm 83-07 PD11 CNT	LATI S.p.A.	Nylon 12	Latiohm