Order Products : sales@su-jiao.com

SI-LINK™ DFDB-5480 NT

Category:	PE, Unspecified , Catalyst Masterbatch for Moisture Curable Power Cable Insulation
Manufacturer:	The Dow Chemical Company
Trademark:	SI-LINK™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	rRd4N3_SI-LINK-DFDB-5480-NT.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Catalyst masterbatch, used to SI-LINK polyethylene material DFDB-5480 NT is a catalyst masterbatch, SI-LINK with Dow™A wet crosslinkable ethylene-silane copolymer including polyethylene DFDA-5451 NT is used together to provide the catalyst required for the crosslinking reaction. Since the catalyst masterbatch is transported separately with the ethylene-silane copolymer, these components are very stable during the shelf life. The crosslinking reaction occurs only after the two insulating material components are melt-mixed and wet-exposed. DFDB-5480 NT has sufficient antioxidant content, therefore, this insulating material system has excellent processing performance and product performance. This insulation system is very effective for copper conduits or aluminum conduits. The recommended usage of DFDB-5480 NT is about 5% (weight ratio). The specific dosage level depends on the process and the processing conditions used. Please contact your Dow sales representative or technical representative for your specific application to determine the usage level.

Message

Catalyst masterbatch, used to SI-LINK polyethylene material

DFDB-5480 NT is a catalyst masterbatch, SI-LINK with Dow™A wet crosslinkable ethylene-silane copolymer including polyethylene DFDA-5451 NT is used together to provide the catalyst required for the crosslinking reaction. Since the catalyst masterbatch is transported separately with the ethylene-silane copolymer, these components are very stable during the shelf life. The crosslinking reaction occurs only after the two insulating material components are melt-mixed and wet-exposed.

DFDB-5480 NT has sufficient antioxidant content, therefore, this insulating material system has excellent processing performance and product performance. This insulation system is very effective for copper conduits or aluminum conduits.

The recommended usage of DFDB-5480 NT is about 5% (weight ratio). The specific dosage level depends on the process and the processing conditions used. Please contact your Dow sales representative or technical representative for your specific application to determine the usage level.

General Information
Additive	Antioxidation
Uses	Low voltage insulation Wire and cable applications
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.930	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	3.0	g/10 min	ASTM D1238

Additional Information
Nominal property values above represent tests on molded stress-relieved slabs. Cure times were 15 minutes at 175°C.

Extrusion	Nominal Value	Unit
Drying Temperature	60.0 - 71.1	°C
Drying Time	4.0 - 6.0	hr

Extrusion instructions
Though the packaging used for DFDB-5480 NT is specifically designed to reduce moisture penetration, drying for 4 to 6 hours at 140°-160°F (60°-70°C) in a hopper drier with dehumidified air is recommended for optimum results. If desired, it may be dry mixed with DFDB-5410 BK carbon black masterbatch prior to being dried.

Resin Grade	Manufacturer	Category	Trademark
RTP 600.5 HB	RTP Company	ABS	RTP
SABIC® Vestolen A 6012	Saudi Basic Industries Corporation (SABIC)	HDPE	SABIC® Vestolen A
SCANAMID 66 A52^E	Polykemi AB	Nylon 66	SCANAMID 66
VisiJet® C4 Spectrum™	3D Systems	Unspecified	VisiJet®
Osterlene® LLH1018	Osterman & Company	LLDPE	Osterlene®