Order Products : sales@su-jiao.com
RTP 1200 T-70A Z NATURAL
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rNp7bG_RTP-1200-T-70A-Z-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TRANSLUCENT |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Moisture Content | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain, 3.18 mm) | 3.03 | MPa | ASTM D412 |
| Tensile Strength 2(Break, 3.20 mm) | 21.4 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 770 | % | ASTM D412 |
| Tear Strength 4 | 61.3 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 - 93.3 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Dew Point | < -17.8 | °C | |
| Processing (Melt) Temp | 188 - 199 | °C | |
| Mold Temperature | 15.6 - 37.8 | °C |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | Mouth die C, 510mm/min |
| 2 . | C mold, 500 mm/min |
| 3 . | Mouth die C, 500 mm/min |
| 4 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UBE Nylon 1013 NW8 | UBE Engineering Plastics, S.A. | Nylon 6 | UBE Nylon |
| VAMPSAB 0023 V2 DF | Vamp Tech | PS (GPPS) | VAMPSAB |
| Elastron® V V100.D40.N | Elastron USA, Inc. | TPV | Elastron® V |
| Hyflon® AD 40H | Solvay Specialty Polymers | Perfluoropolymer | Hyflon® AD |
| Lushan M-10F | Guangzhou Lushan New Materials Co., Ltd | PE, Unspecified | Lushan |
