Order Products : sales@su-jiao.com
Techsil 211
| Category: | Silicone , Silicone |
| Manufacturer: | Techsil Limited |
| Trademark: | Techsil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rNippP_Techsil-211.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TECHSIL 211 silicone elastomer is a two component, self-levelling, room temperature curing product. This product is designed for use on electronic assemblies or any other applications that require neutral cure and non-corrosive cure by-products. TECHSIL 211 features excellent flow and self-levelling characteristics. Typical applications include but are not restricted to electronic and electrical potting, casting and simple mould making. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.19 | g/cm³ | |
| Molding Shrinkage - Flow | 0.50 | % |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 45 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength 1(Yield) | 2.40 | MPa | |
| Tensile Elongation 2(Break) | 200 | % | |
| Tear Strength 3 | 8.90 | kN/m |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Thermal Conductivity | 0.24 | W/m/K |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Volume Resistivity | 3.0E+14 | ohms·cm | |
| Dielectric Strength | 25 | kV/mm | |
| Dielectric Constant (60 Hz) | 3.40 | ||
| Dissipation Factor (60 Hz) | 5.0E-3 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Mix Viscosity (25°C) | 7.00 to 10000 | cP |
| Note Message | |
|---|---|
| 1 . | 3mm sheet cured for 48hrs at RT and 65% RH with 0.5% catalyst |
| 2 . | 3mm sheet cured for 48hrs at RT and 65% RH with 0.5% catalyst |
| 3 . | 3mm sheet cured for 48hrs at RT and 65% RH with 0.5% catalyst |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RODRUN LC-5050GM | UNITIKA Plastics Division | LCP | RODRUN |
| Ultramid® A3Z HP UV | BASF Corporation | Nylon 66 | Ultramid® |
| Bergadur™ BR3300-8026 RS NC711 | PolyOne Corporation | PBT | Bergadur™ |
| Kepex® 3600 | Korea Engineering Plastics Co., Ltd | PBT | Kepex® |
| VALOX™ 865 resin | SABIC Innovative Plastics | PBT | VALOX™ |
