Order Products : sales@su-jiao.com
Utomer UT1CP85AC
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Shanghai Utomer Material Science Co., Ltd. |
| Trademark: | Utomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rNHWx9_Utomer-UT1CP85AC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TYPE: Utomer UT1CP85AC TPU is a 85A Polyether-type thermoplastic polyurethane (TPU) compound Features: Excellent clarity and UV stable with good melt strength. Uses: Injection for 3 c electronic products or shoe part. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | < 35.0 | mm³ | DIN 53516 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | > 9.00 | MPa | |
| 300% Strain | > 19.0 | MPa | |
| Tensile Strength | > 30.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | > 500 | % | ASTM D412 |
| Tear Strength | > 0.110 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 23°C, 70 hr | < 28 | % | |
| 70°C, 24 hr | < 35 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -20.0 | °C | ASTM D3418 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 180 | °C | |
| Middle Temperature | 185 | °C | |
| Front Temperature | 190 | °C | |
| Nozzle Temperature | 195 | °C | |
| Mold Temperature | 30.0 to 50.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® A RV200L 100 NAT | Radici Plastics | Nylon 66 | Radilon® |
| TATREN® HG 10 07 | Slovnaft Petrochemicals, s.r.o. | PP Homopolymer | TATREN® |
| ALCUDIA® HDPE TR-131 | REPSOL | HDPE | ALCUDIA® HDPE |
| Diakon® ST15G7L | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| EPO-TEK® TZ101 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
