Order Products : sales@su-jiao.com
STRATOR® A-4
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | EPIC Polymers |
| Trademark: | Strator® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rMewMM_STRATOR-A-4.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| STRATOR® A-4 is a Polyamide 66 (Nylon 66) product filled with 40% long glass fiber. It is available in Europe. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.50 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow | 0.30 | -- | % | ISO 294-4 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 1.5 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | ISO 527-2 | |||
| 23°C | 13600 | 10200 | MPa | |
| 90°C | 8900 | -- | MPa | |
| 120°C | 7900 | -- | MPa | |
| Tensile Stress | ISO 527-2 | |||
| Yield, 23°C | 220 | 190 | MPa | |
| Yield, 90°C | 140 | -- | MPa | |
| Yield, 120°C | 120 | -- | MPa | |
| Tensile Strain (Break, 23°C) | 2.6 | -- | % | ISO 527-2 |
| Flexural Modulus (23°C) | 12000 | 9100 | MPa | ISO 178 |
| Flexural Stress (23°C) | 330 | 270 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 30 | 35 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | 70 | 90 | kJ/m² | ISO 179 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 255 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 250 | -- | °C | ISO 75-2/A |
| CLTE - Flow (23°C) | 2.3E-5 | -- | cm/cm/°C | ISO 7991 |
| Thermal Conductivity | 0.33 | -- | W/m/K | ISO 22007 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+12 | -- | ohms | ASTM D257 |
| Electric Strength | 35 | -- | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 500 | -- | V | IEC 60112 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 110 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Rear Temperature | 270 to 300 | °C | |
| Middle Temperature | 270 to 300 | °C | |
| Front Temperature | 285 to 310 | °C | |
| Nozzle Temperature | 285 to 320 | °C | |
| Processing (Melt) Temp | < 310 | °C | |
| Mold Temperature | 80.0 to 160 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PP R7701 | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| Sunny® PBT EB115 | Guangdong Shunde Shunyan New Material Co., Ltd. | PBT | Sunny® |
| TAROLOX GFR 5 | Taro Plast S.p.A. | PBT | TAROLOX |
| NYCOA Polyamide 512 HS | Nycoa (Nylon Corporation of America) | Nylon 6 | NYCOA Polyamide |
| Durethan® BG 30 X H2.0 901510 | LANXESS GmbH | Nylon 6 | Durethan® |
