Order Products : sales@su-jiao.com
RC Plastics RCPA6 GF 30
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | RC Plastics, Inc. (Div. of LNP Engineering Plastics) |
| Trademark: | RC Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rL5Wza_RC-Plastics-RCPA6-GF-30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| RC Plastics RCPA6 GF 30 is a Polyamide 6 (Nylon 6) product filled with 30% glass fiber. It can be processed by injection molding and is available in North America. Primary characteristic: eco-friendly/green. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Recycled Content |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.37 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.35 to 0.45 | % | ASTM D955 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 1.1 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 143 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.5 | % | ASTM D638 |
| Flexural Modulus | 7450 | MPa | ASTM D790 |
| Flexural Strength | 211 | MPa | ASTM D790 |
| Coefficient of Friction | ASTM D1894 | ||
| vs. Itself - Dynamic | 0.32 | ||
| vs. Itself - Static | 0.26 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 48 | J/m | ASTM D256 |
| Unnotched Izod Impact | 910 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 210 | °C | ASTM D648 |
| Melting Temperature | 216 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 4.0 to 6.0 | hr | |
| Rear Temperature | 249 to 288 | °C | |
| Middle Temperature | 249 to 288 | °C | |
| Front Temperature | 249 to 288 | °C | |
| Processing (Melt) Temp | 266 to 277 | °C | |
| Mold Temperature | 87.8 to 93.3 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.00 to 0.689 | MPa | |
| Screw Speed | 30 to 60 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ADDINYL C2 M20 V10 | ADDIPLAST | Nylon 66/6 | ADDINYL |
| Andur 850 AP/Curene® 442 | Anderson Development Company | PUR-Est/eth,TDI | Andur |
| ARC ARC1420 | ARC Resin Corporation | ABS | ARC |
| Grilamid® L 20H FWA nat | EMS-GRIVORY | Nylon 12 | Grilamid® |
| LNP™ THERMOCOMP™ RB006 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
