Order Products : sales@su-jiao.com
TECAFORM® SD
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | Ensinger Inc. |
| Trademark: | TECAFORM® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rKxIfD_TECAFORM-SD.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
In recent years, industry has demanded a range of materials that not only possess strength, wear properties, heat and chemical resistance but materials that are less resistive to the build-up of a static charge. Ensinger has a family of such materials; their properties are listed on the reverse side of this sheet and described below. Ensinger's static dissipative acetal contains no carbon fibers or powders and is generally accepted for clean room use. With its surface resistivity of 109 to 1011 ohm/square and its excellent bearing and wear characteristics, TECAFORM™ SD is ideal for moving components which may experience frictional or fluid-flow static charges. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| Saturation | 0.20 | % | ASTM D570 |
| Balance | 0.20 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 45.5 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 45 | % | ASTM D638 |
| Flexural Modulus | 1450 | MPa | ASTM D790 |
| Flexural Strength | 48.3 | MPa | ASTM D790 |
| Coefficient of Friction | |||
| With self-dynamics | 0.18 | ||
| With Self-Static | 0.11 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact | 96 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 82.2 | °C | |
| Heat Deflection Temperature | 88 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+9 - 1.0E+11 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Additional Information |
|---|
| Data obtained from extruded shapes material. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKNIFLEX® VPA10300 | Tekni-Films, a div of Tekni-Plex | Film, PVC/PE/PCTFE | TEKNIFLEX® |
| Stylac™ 120 | Asahi Kasei Chemicals Corporation | ABS | Stylac™ |
| Unichem 4260A-66 | Colorite Polymers | PVC, Flexible | Unichem |
| HiFill® PA6 GF50 L | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| Iupilon® CLS400 | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
