Order Products : sales@su-jiao.com
Estane® 58238 TPU
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rEAFF6_Estane-58238-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Polyester Thermoplastic Polyurethane (TPU) Special Feature: Excellent Elasticity, with Good Recovery and Low Temperature Properties Processes: Extrusion: Blown, Flat Die Cast Film, and Injection Molding |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 75 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 21.0 | mg | ASTM D3389 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (200% Strain) | 4 | % | ASTM D412 |
| Tensile Stress | ASTM D412 | ||
| 100% strain, 0.762mm | 4.50 | MPa | ASTM D412 |
| 300% strain, 0.762mm | 12.4 | MPa | ASTM D412 |
| Tensile Strength (Break, 0.762 mm) | 48.3 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 680 | % | ASTM D412 |
| Tear Strength | |||
| 0.762 mm | 68.6 | kN/m | ASTM D624 |
| Cracking | 18 | kN/m | ASTM D470 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -45.0 | °C | DSC |
| Melting Temperature | 128 | °C | DSC |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 177 | °C | |
| Cylinder Zone 2 Temp. | 183 | °C | |
| Cylinder Zone 3 Temp. | 193 | °C | |
| Cylinder Zone 4 Temp. | 194 | °C | |
| Adapter Temperature | 194 | °C | |
| Melt Temperature | 191 | °C | |
| Die Temperature | 194 | °C |
| Extrusion instructions |
|---|
| Screen Pack Recommendation: 20/40/80 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MEVOPUR® Medical Masterbatches | Clariant Corporation | TP, Unspecified | MEVOPUR® |
| Bayflex® 180 RRIM (20% Mineral) | Covestro - PUR | PUR-Ether/MDI | Bayflex® |
| Echo® RPC20G BK | Ravago Manufacturing Americas, LLC | PP Homopolymer | Echo® |
| LNP™ THERMOTUF™ RF008IS compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOTUF™ |
| POCAN® B 4235 Z 000000 | LANXESS Corporation | PBT | POCAN® |
