Order Products : sales@su-jiao.com
Cosmic Epoxy EH40
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cosmic Plastics, Inc. |
| Trademark: | Cosmic Epoxy |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rDhdL5_Cosmic-Epoxy-EH40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DESCRIPTION Cosmic EH40 is an iron filled epoxy molding compound which is supplied in a granular form. FEATURES This material flows easily under low pressure and provides good moldability. APPLICATIONS The material is good for EMI / RFI shielding, and can be either compression or transfer molded to fabricate core rods and to encapsulate surface mount and axial leaded inductors. This single molded compound eliminates the labor intensive over-under molding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 2.59 | g/cm³ | |
| Bulk Factor | 2.5 | ||
| Spiral Flow | 30.0 - 40.0 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Shelf Life (5°C) | 35 | wk | |
| Post Cure Time (160°C) | 2.0 - 4.0 | hr |
| Additional Information |
|---|
| Inductance Ls (µH) : 0.1981Quality Factor : 2.9 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 130 - 180 | °C | |
| Injection Pressure | 0.345 - 5.52 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ResMart PC/ABS NH-1015V | ResMart | PC+ABS | ResMart |
| Luran® SAN C | Styrolution | SAN | Luran® |
| Plenco 07500 (Compression) | Plastics Engineering Co. | Phenolic | Plenco |
| MACOMASS PP MM-PP GF 30 | MACOMASS Verkaufs AG | PP, Unspecified | MACOMASS PP |
| Sylvin 4200-70 Clear 876 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
