Order Products : sales@su-jiao.com
Andur 5 DPLM
| Category: | PUR-Ester/TDI , Polyurethane (Polyester, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rCi07M_Andur-5-DPLM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 5-DPLM is a polyester based, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 50 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by curing Andur 5-DPLM with poyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.24 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 21°C | 105000 | cP | ASTM D2393 |
| 70°C | 2000 | cP | ASTM D2393 |
| 100°C | 450 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 5.5 to 5.9%Specific Gravity, ASTM D792, 70°F: 1.24 g/mlSpecific Gravity, ASTM D792, 212°F: 1.2 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® F7880 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Bayflex® 110-35 IMR (15% Glass) | Covestro - PUR | PUR-Ether/MDI | Bayflex® |
| Buna® EP G 3963 | LANXESS Corporation | EPDM | Buna® EP |
| DOMAMID® 66G30HUV | DOMO Engineering Plastics SPA | Nylon 66 | DOMAMID® |
| Huafon JF-HSY-9818 | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
