Order Products : sales@su-jiao.com

BITONER® TR-2080

Category:	TP, Unspecified , Thermoplastic
Manufacturer:	Qingdao Bater Chemical Co., Ltd.
Trademark:	BITONER®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	r825Gc_BITONER-TR-2080.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
BITONER TR-2080 is thermoplastic, low molecular weight, slightly yellow C5 and C9 co-polymerized resin. Possessing the good characters of C5 and C9 hydrocarbon resin,it is characterized by its wide compatibility with EVA,SIS,SBS and other polymers,very light color, extremely low odor,low cloud point and good heat stability. TR-2080 is especially suitable for Hot melt adhesives and rubber based PSA. Characteristics: Excellent compatibility with various polymers and resins very light color and good heat resistance Low Molecular weight Low volatility and very low odor Water resistance Application: Hot Melt Adhesive PSA Coatings Rubber Compounds.

Message

BITONER TR-2080 is thermoplastic, low molecular weight, slightly yellow C5 and C9 co-polymerized resin. Possessing the good characters of C5 and C9 hydrocarbon resin,it is characterized by its wide compatibility with EVA,SIS,SBS and other polymers,very light color, extremely low odor,low cloud point and good heat stability. TR-2080 is especially suitable for Hot melt adhesives and rubber based PSA.

Characteristics:

Excellent compatibility with various polymers and resins

very light color and good heat resistance

Low Molecular weight

Low volatility and very low odor

Water resistance

Application:

Hot Melt Adhesive

Coatings

Rubber Compounds.

General Information
Features	Good Thermal Stability Low Molecular Weight Low to No Odor Low to No Water Absorption
Uses	Adhesives Coating Applications
Appearance	Yellow

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.978 to 1.07	g/cm³	Internal Method
Ash Content	< 0.050	%
Color - 50% resin solid in Toluene	Max3#		ASTM D1544

Thermal	Nominal Value	Unit	Test Method
Softening Point ¹	95 to 105	°C	ASTM E28

Fill Analysis	Nominal Value	Unit	Test Method
Melt Viscosity (175°C)	< 450	mPa·s	ASTM D3236

Additional Information	Nominal Value	Unit	Test Method
Volatiles (150°C)	< 1.0	wt%

Note Message
1 .	Ring & Ball

Resin Grade	Manufacturer	Category	Trademark
StarXTRUDE XTR-70-1000	STAR Thermoplastic Alloys & Rubbers, Inc.	TPE	StarXTRUDE
ARBOFORM® ZE 50 natur	TECNARO GmbH	CA	ARBOFORM®
CompaDur® 125 GF 30 black (047)	DimeLika Plast GmbH	PBT+PET	CompaDur®
Flexil™ 22S	Polymer Dynamix	Nylon 12	Flexil™
Hanwha Total PP FB76S	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP, Unspecified	Hanwha Total PP