Order Products : sales@su-jiao.com
TECASON™ P
| Category: | PPSU , Polyphenylsulfone |
| Manufacturer: | Ensinger Inc. |
| Trademark: | TECASON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | r4Y8ZW_TECASON-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Offering a level of performance above polysulfones, TECASON™P has increased temperature, impact and chemical resistance properties as well as excellent resistance to repeated steam sterilization (autoclave) cycles. TECASON™ P is a polyphenylsufone that exhibits excellent temperature, impact and chemical resistance properties. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 123 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2340 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 69.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 60 | % | ASTM D638 |
| Flexural Modulus | 2410 | MPa | ASTM D790 |
| Flexural Strength | 91.0 | MPa | ASTM D790 |
| Compressive Strength | 98.9 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact | 690 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 220 | °C | |
| 1.8 MPa, Unannealed | 216 | °C | |
| Vicat Softening Temperature | 218 | °C | ASTM D1525 |
| CLTE - Flow | 3.1E-5 | cm/cm/°C | ASTM D696 |
| Maximum Service Temperature - Intermittent | 182 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength | 14 | kV/mm | ASTM D149 |
| Dielectric Constant 1(60 Hz) | 3.44 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | 50% RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKNIFLEX® MED 3014-0180 | Tekni-Films, a div of Tekni-Plex | Film, PP | TEKNIFLEX® MED |
| NEXUS PE HDPE-00649 | Nexus Resin Group, LLC. | HDPE | NEXUS PE |
| NuSil MED-4050 | NuSil Technology | Rubber | NuSil |
| ARC ARC1420 | ARC Resin Corporation | ABS | ARC |
| INLUBE PA12GF15TF15 | Infinity LTL Engineered Compounds | Nylon 12 | INLUBE |
