Order Products : sales@su-jiao.com
Premier PI040K
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Premier Polymers, LLC. |
| Trademark: | Premier |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | r0fGpO_Premier-PI040K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Premier PI040K is an impact copolymer polypropylene that exhibits very high flexibility and strength. This resin is considered "no break." Meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 25.1 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 7.1 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 1100 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | No Break | ASTM D256 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Globalene® PD0101 | Lee Chang Yung Chemical Industry Corp. | PP Alloy | Globalene® |
| EPO-TEK® 323LP-LH Ultra | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Idemitsu PS SEHI-107 | Idemitsu PS | PS (HIPS) | Idemitsu PS |
| O'Tech OW 641 ABFR | O'Tech Corporation | PVC, Unspecified | O'Tech |
| Mediprene® 500602M | ELASTO | SEBS | Mediprene® |
