Order Products : sales@su-jiao.com

ALCUDIA® LDPE 2322M

Category:	LDPE , Low Density Polyethylene
Manufacturer:	REPSOL
Trademark:	ALCUDIA® LDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	r0QC4y_ALCUDIA-LDPE-2322M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ALCUDIA® 2322M is a low density polyethylene grade of high fluidity intended for those injection moulding applications in which toughness and good flow properties are required. Its formulation does not contain additives. TYPICAL APPLICATIONS Due to its good properties balance, ALCUDIA® 2322M is a very versatile grade and is suitable for articles of very diverse sizes: Industrial parts and components. Caps and closures. Toys. Recommended melt temperature range from 180 to 230°C. Processing conditions should be optimised for each production line.

Message

ALCUDIA® 2322M is a low density polyethylene grade of high fluidity intended for those injection moulding applications in which toughness and good flow properties are required. Its formulation does not contain additives.

TYPICAL APPLICATIONS
Due to its good properties balance, ALCUDIA® 2322M is a very versatile grade and is suitable for articles of very
diverse sizes:

Industrial parts and components.

Caps and closures.

Toys.

Recommended melt temperature range from 180 to 230°C. Processing conditions should be optimised for each production line.

General Information
Features	Additive Free Food Contact Acceptable Good Flow Good Toughness High Flow
Uses	Caps Closures Industrial Applications Toys
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.923	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	22	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	47		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break)	9.00	MPa	ISO 527-2
Tensile Strain (Break)	380	%	ISO 527-2
Flexural Modulus	150	MPa	ISO 178

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	80.0	°C	ISO 306/A

Injection	Nominal Value	Unit
Processing (Melt) Temp	180 to 230	°C

Resin Grade	Manufacturer	Category	Trademark
RTP 1005 GB 10	RTP Company	PBT	RTP
Unipren® Elastomers A3 CRLA010 45A XP01 UP357	Petropol Industry and Trade of Polymers LTDA	TPE	Unipren® Elastomers
Evermore PUR SW-8050H	Evermore Chemical Industry Co., Ltd.	PUR, Unspecified	Evermore PUR
DOWLEX™ 2064G	The Dow Chemical Company	LLDPE	DOWLEX™
MAXATEL® AC90LW-NAT	Pier One Polymers, Inc.	Acetal (POM) Copolymer	MAXATEL®