Order Products : sales@su-jiao.com

Arak LLDPE LL0640AA / LL0640KJ

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Shazand (Arak) Petrochemical Corporation
Trademark:	Arak LLDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	qzDKvc_Arak-LLDPE-LL0640AA-LL0640KJ.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
LL0640AA & LL0640KJ are linear low density polyethylene copolymers containing butene-1 as a co-monomer. LL0640AA & LL0640KJ have been specially designed for the production of high quality cast films, such as display packaging, bubble film and non cling layer for stretch film. LL0640AA & LL0640KJ have the following advantages: High melt flow rate for high output cast extrusion. Excellent combination of strengths and stiffness. High gloss and clarity. If corona treatment is necessary, the level should normally be in the range 38-48 mN/m. Melt temperature range in the cast process are normally 220°C-260°C and in lean blends for blown film are 160°C-215°C. LL0640AA & LL0640KJ should be stored in the dry condition below the 50°C andavoided from the exposure of direct sunlight. * LL0640AA & LL0640KJ are suitable for food contact.

Message

LL0640AA & LL0640KJ are linear low density polyethylene copolymers containing butene-1 as a co-monomer.

LL0640AA & LL0640KJ have been specially designed for the production of high quality cast films, such as display packaging, bubble film and non cling layer for stretch film.

LL0640AA & LL0640KJ have the following advantages:

High melt flow rate for high output cast extrusion.

Excellent combination of strengths and stiffness.

High gloss and clarity.

If corona treatment is necessary, the level should normally be in the range 38-48 mN/m.
Melt temperature range in the cast process are normally 220°C-260°C and in lean blends for blown film are 160°C-215°C.

LL0640AA & LL0640KJ should be stored in the dry condition below the 50°C andavoided from the exposure of direct sunlight.

* LL0640AA & LL0640KJ are suitable for food contact.

General Information
Features	Butene Comonomer Copolymer Food Contact Acceptable High Clarity High Flow High Gloss High Stiffness High Strength
Uses	Cast Film Film Packaging Stretch Wrap
Processing Method	Blown Film Cast Film

Physical	Nominal Value	Unit	Test Method
Density	0.929	g/cm³	ASTM D2838
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	4.0	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	40	µm
Tensile Strength			ASTM D882
MD : Yield	12.0	MPa
TD : Yield	12.0	MPa
MD : Break	33.0	MPa
TD : Break	25.0	MPa
Tensile Elongation			ASTM D882
MD : Break	600	%
TD : Break	810	%

Optical	Nominal Value	Unit	Test Method
Gloss (45°)	87		ASTM D2457
Haze	2.0	%	ASTM D1003

Additional Information	Nominal Value	Unit
Blown Film Melt Temperature	160 to 215	°C
Cast Film Melt Temperature	220 to 260	°C

Resin Grade	Manufacturer	Category	Trademark
RheTech Thermoplastic Polyolefin FT4900-746UV	RheTech, Inc.	Polyolefin, Unspecified	RheTech Thermoplastic Polyolefin
Taizhou Phenolic PF2A4-151J	Taizhou Changxiong Plastic Co., Ltd.	Phenolic	Taizhou Phenolic
ULTEM™ 2210R resin	SABIC Innovative Plastics	PEI	ULTEM™
GPPS Microgranulates 171M	INEOS Styrenics International SA	PS (GPPS)	GPPS Microgranulates
OP - PC - Filled 10GF-VO	Oxford Polymers	PC	OP - PC - Filled