Order Products : sales@su-jiao.com
Laprene® 83E29ZA45
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Laprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qz3G9f_Laprene-83E29ZA45.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Laprene®83E29ZA45 is a styrene-ethylene-butene-styrene block copolymer (SEBS) material,. This product is available in North America, Latin America or Europe. The processing method is: extrusion. Laprene®The main characteristics of 83E29ZA45 are: compliance with REACH standards. Typical application areas include:
|
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 3 sec) | 46 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | 2 | % | ASTM D412 |
| Tensile Stress 1(100% Strain) | 0.900 | MPa | ASTM D412 |
| Tensile Strength 2 | 6.80 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 750 | % | ASTM D412 |
| Tear Strength 4 | 26.0 | kN/m | ASTM D624 |
| Compression Set 5(70°C, 22 hr) | 33 | % | ASTM D395B |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Cylinder Zone 1 Temp. | 170 | °C | |
| Cylinder Zone 2 Temp. | 180 | °C | |
| Cylinder Zone 3 Temp. | 190 | °C | |
| Die Temperature | 180 | °C |
| Extrusion instructions |
|---|
| Extrusion Head Temperature: 190°C |
| Note Message | |
|---|---|
| 1 . | Mouth die c |
| 2 . | Mouth die c |
| 3 . | Mouth die c |
| 4 . | C mould |
| 5 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAIRILAC AG12A3 | Formosa Plastics Corporation | ABS | TAIRILAC |
| Monprene® CP-28136 | Teknor Apex Company | TPE | Monprene® |
| AKROMID® A3 S1 natural (2310) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| Kingfa MAC-451 | Kingfa | PC+ABS | Kingfa |
| Lion Idemitsu Composites PPS C-719SG | Lion Idemitsu Composites Co., Ltd. | PPS | Lion Idemitsu Composites PPS |
