Order Products : sales@su-jiao.com

NuSil R-2550

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	qtimoe_NuSil-R-2550.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Adhesives and Sealants Comment: High Temperature Elastomer

Message

The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.

Fuel Resistance

Static Dissipation and Electrically Conductive Silicones

Ice-Phobic Coatings

General Purpose: Adhesives and Sealants

Comment: High Temperature Elastomer

General Information
Features	Electrically Conductive Fuel Resistant High Heat Resistance
Uses	Adhesives Aircraft Applications Sealants

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 100
Part B	Mix Ratio by Weight: 0.50

Additional Information	Nominal Value	Unit
Cure System	Tin
Operating Temperature	-115 to 200	°C

Uncured Properties	Nominal Value	Unit
Color	Translucent
Density	1.08	g/cm³
Viscosity	9.0	Pa·s
Curing Time (23°C)	1.7E+2	hr
Pot Life	360	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	35
Tensile Strength	3.45	MPa
Tensile Elongation at Break	180	%
Tear Strength	3.50	kN/m

Resin Grade	Manufacturer	Category	Trademark
RTP 2200 LF GB 30	RTP Company	PEEK	RTP
Styrolution PS 476L	INEOS Styrolution Group GmbH	PS (HIPS)	Styrolution PS
Elastocon® STK70	Elastocon TPE Technologies	TPE	Elastocon®
Jamplast JPQ	Jamplast, Inc.	SPS	Jamplast
HIFOR Xtreme® SC74883	Westlake Chemical Corporation	LLDPE	HIFOR Xtreme®