Order Products : sales@su-jiao.com
En Chuan 6010WAL
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | En Chuan Chemical Industries Co,. Ltd. |
| Trademark: | En Chuan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qeBYtP_En-Chuan-6010WAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This resin contains wax and transparent accelerator. The outstanding characteristic of this resin is its good transparency, and is very suitable for the casting of large and medium imitated artistic items. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Barcol Hardness 1 | 10 | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 3330 | MPa | ASTM D790 |
| Flexural Strength | 80.4 | MPa | ASTM D790 |
| Additional Information |
|---|
| Transparent Accelerator, Co-oct (Co 6%): .5%Hardener, MEKPO (PO content, 55%): 1% |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (25°C) | 1.11 - 1.13 | g/cm³ | |
| Viscosity (25°C) | 0.20 - 0.40 | Pa·s | |
| Gel Time (25°C) | 2.5 - 6.0 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 0.520 | MPa | |
| Tensile Elongation at Break | 2.7 | % |
| Note Message | |
|---|---|
| 1 . | Barcol 934-1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TABOREN PC 82 G 15 | SILON s.ro | PP Copolymer | TABOREN |
| DOW™ LDPE 133A | The Dow Chemical Company | LDPE | DOW™ LDPE |
| Celcon® LW90FS-K | Celanese Corporation | Acetal (POM) Copolymer | Celcon® |
| KOPA® KN136 | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
| LEXAN™ 925 resin | SABIC Innovative Plastics | PC | LEXAN™ |
