Order Products : sales@su-jiao.com

Pinnacle PP 2108

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Pinnacle Polymers
Trademark:	Pinnacle PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	qaKO02_Pinnacle-PP-2108.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

8 MELT FLOW MEDIUM IMPACT COPOLYMER POLYPROPYLENE

Pinnacle Polymers Polypropylene 2108 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.

This product is intended for sheet extrusion, thermoformed containers, and injection molding applications where toughness and cold temperature impact strength are required.

The 2108 product provides:

Excellent cleanliness

Superior toughness

Excellent color and process stability

Good melt strength

UL Listed

Pinnacle's 2108 polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

General Information
Features	Clean/High Purity Food Contact Acceptable Good Color Stability Good Melt Strength Good Processing Stability Good Toughness Impact Copolymer Low Temperature Impact Resistance Medium Impact Resistance
Uses	Sheet Thermoformed Containers
Agency Ratings	FDA 21 CFR 176.170 Table 1 & 2, Cond A-H FDA 21 CFR 177.1520(c) 3.1a FDA 21 CFR 177.1520(c) 3.2a UL Unspecified Rating
Forms	Pellets
Processing Method	Injection Molding Sheet Extrusion Thermoforming

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	8.0	g/10 min	ASTM D1238
Molding Shrinkage - Flow	1.5	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 3.20 mm, Injection Molded)	24.2	MPa	ASTM D638
Tensile Elongation ²(Yield, 3.20 mm, Injection Molded)	11	%	ASTM D638
Flexural Modulus - 1% Secant ³(3.20 mm, Injection Molded)	1280	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact ⁴(23°C, 3.20 mm, Injection Molded)	> 320	J/m	ASTM D256
Notched Izod Impact (Area) ⁵(23°C, 3.20 mm, Injection Molded)	> 31.0	kJ/m²	ASTM D256
Gardner Impact ⁶(-30°C)	> 150	J	ASTM D5420

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	104	°C	ASTM D648

Note Message
1 .	Type I, 51 mm/min
2 .	Type I, 51 mm/min
3 .	Type I, 1.3 mm/min
4 .	Type I
5 .	Type I
6 .	Method G, Geometry GC

Resin Grade	Manufacturer	Category	Trademark
Synprene™ RT-5155 RoHS Natural	PolyOne Corporation	SBC	Synprene™
NILENE® P6 K25VA	Taro Plast S.p.A.	PP Homopolymer	NILENE®
Ferro PP LPP40BI04BK	Ferro Corporation	PP Copolymer	Ferro PP
KumhoSunny ASA XC220	Shanghai KumhoSunny Plastics Co., Ltd.	ASA	KumhoSunny ASA
Karina GREEN COLOR CONCENTRATE 40/416-FC-LMP	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina