Order Products : sales@su-jiao.com
Kemcor MD 6530
| Category: | LMDPE , Linear Medium Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Kemcor |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qSUazy_Kemcor-MD-6530.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MD 6530 is manufactured using the fluidized bed process. This resin is manufactured to conform to the requirements for unrestricted food contact of AS 2070 Part 1 (1992). |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.939 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 540 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 20.0 | MPa | |
| Break | 25.0 | MPa | |
| Tensile Elongation (Break) | 950 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 140 | J/m | ASTM D256 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinvicomp SRG7565 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| SLOVAMID® 6 GF 65/1M | Plastcom | Nylon 6 | SLOVAMID® 6 |
| APICAL 50NP | Kaneka North America LLC | Film, PI | APICAL |
| EnviroPCABS 5010IM | West Michigan Compounding | PC+ABS | EnviroPCABS |
| INEOS PP H35Z-00 | INEOS Olefins & Polymers USA | PP Homopolymer | INEOS PP |
