PRISM™ EP2400

Category:	Epoxy , Epoxy; Epoxide
Manufacturer:	Cytec Industries Inc.
Trademark:	PRISM™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	qRmgHy_PRISM-EP2400.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PRISM™ EP2400 is a single part, 180°C (356°F) curing, toughened liquid epoxy resin system offering simple and flexible processing with the damage tolerance required for composite primary structure. The value of resin infusion is the ability to design complex geometric parts while leveraging a unitized structure which ultimately leads to a reduction in weight, lower part counts and the elimination of many post-manufacturing processes. The growth in resin infusion drives the demand for new resin and textile solutions which exhibit increased toughness and improved processability. PRISM EP2400 has an optimized low viscosity/temperature profile allowing injections at temperatures from 70°C (158°F) without the need for excessive heating of resin transfer pipework or high injection pressures. After injection, the resin viscosity decreases to below 20 cP, helping to ensure full fiber wetting. PRISM EP2400 offers a dry Tg (storage modulus intercept) of 179°C (354°F) and an exceptional wet Tg of 163°C (325°F) following a two-hour cure at 180°C (356°F). Suggested Applications: Primary structure applications requiring superior toughness, low viscosity and extended pot-life Stringer Stiffened Box Covers Fuselage and Window Frames Pressure Bulkheads Passenger and Cargo Door Structures Engine Containment Cases Hinge/Brackets/Fittings

Message

PRISM™ EP2400 is a single part, 180°C (356°F) curing, toughened liquid epoxy resin system offering simple and flexible processing with the damage tolerance required for composite primary structure.

The value of resin infusion is the ability to design complex geometric parts while leveraging a unitized structure which ultimately leads to a reduction in weight, lower part counts and the elimination of many post-manufacturing processes. The growth in resin infusion drives the demand for new resin and textile solutions which exhibit increased toughness and improved processability.

PRISM EP2400 has an optimized low viscosity/temperature profile allowing injections at temperatures from 70°C (158°F) without the need for excessive heating of resin transfer pipework or high injection pressures. After injection, the resin viscosity decreases to below 20 cP, helping to ensure full fiber wetting.

PRISM EP2400 offers a dry Tg (storage modulus intercept) of 179°C (354°F) and an exceptional wet Tg of 163°C (325°F) following a two-hour cure at 180°C (356°F).

Suggested Applications:
Primary structure applications requiring superior toughness, low viscosity and extended pot-life
Stringer Stiffened Box Covers
Fuselage and Window Frames
Pressure Bulkheads
Passenger and Cargo Door Structures
Engine Containment Cases
Hinge/Brackets/Fittings

General Information
Features	Flame Retardant Good Compressive Strength Good Processability Good Toughness Heat Cure Low Smoke Emission Low Viscosity
Uses	Aerospace Applications Fittings Protective Coverings Structural Parts
Forms	Fabric

Physical	Nominal Value	Unit
Specific Gravity ¹	1.24	g/cm³

Mechanical	Nominal Value	Unit
Tensile Modulus ²	3380	MPa
Tensile Strength ³	95.1	MPa
Tensile Elongation ⁴(Break)	7.2	%
Flexural Modulus ⁵	3590	MPa
Flexural Strength ⁶	164	MPa

Thermal	Nominal Value	Unit
Glass Transition Temperature ⁷	179	°C
CLTE - Flow ⁸	6.1E-5	cm/cm/°C

Note Message
1 .	Neat Resin
2 .	Neat Resin
3 .	Neat Resin
4 .	Neat Resin
5 .	Neat Resin
6 .	Neat Resin
7 .	Neat Resin, Dry
8 .	Neat Resin

Resin Grade	Manufacturer	Category	Trademark
NuSil MED-6400	NuSil Technology	Silicone	NuSil
Adell PP R-19	Adell Plastics, Inc.	PP Homopolymer	Adell PP
Axiall PVC 53061A	Axiall Corporation	PVC, Flexible	Axiall PVC
Chemlon® 433 GH	Teknor Apex Company (Chem Polymer)	Nylon 6	Chemlon®
Sylvin 9067F3 Red 6265	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin