Order Products : sales@su-jiao.com
Miramid® VEP30C
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | BASF Leuna GmbH |
| Trademark: | Miramid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qQu2qU_Miramid-VEP30C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Miramid® VEP30C is a Polyamide 6 (Nylon 6) material filled with 30% glass fiber. It is available in Europe for injection molding. Important attributes of Miramid® VEP30C are:
Typical applications include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Multi-Point Data |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1300 | -- | kg/m³ | ISO 1183 1 |
| Water Absorption | ISO 62 2 | |||
| Saturation | 5.5 | -- | % | |
| Equilibrium | 1.6 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile modulus | 7900 | 4600 | MPa | ISO 527-2 3 |
| Tensile Stress (Break) | 135 | 100 | MPa | ISO 527-2 4 |
| Tensile Strain (Break) | 5.0 | 10 | % | ISO 527-2 5 |
| Flexural Stress 6 | 200 | 130 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy notched impact strength | ISO 179/1eA 7 | |||
| -30°C | 15.0 | -- | kJ/m² | |
| 23°C | 25.0 | 30.0 | kJ/m² | |
| Charpy impact strength | ISO 179/1eU 8 | |||
| -30°C | 95.0 | -- | kJ/m² | |
| 23°C | 95.0 | 100 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ISO 75-2 9 | |||
| 0.45 MPa | 215 | -- | °C | |
| 1.8 MPa | 205 | -- | °C | |
| Melting Temperature (DSC) | 220 | -- | °C | ISO 3146 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume resistivity | 1.0E+13 | 1.0E+10 | ohms·m | IEC 60093 10 |
| Dielectric Constant (1 MHz) | 3.60 | 6.00 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.020 | 0.20 | IEC 60250 11 | |
| Comparative tracking index | 550 | -- | IEC 60112 12 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 260 to 290 | °C | |
| Mold Temperature | 80.0 to 100 | °C |
| Note Message | |
|---|---|
| 1 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 2 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 4 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 5 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 6 . | Typical values for uncoloured product at 23°C |
| 7 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 8 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 9 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 10 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 11 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 12 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SOLARENE H635 | Dongbu Hannong Chemical | PS (HIPS) | SOLARENE |
| TEREZ PA 6.6 7530 GF 15 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| Bayfit® 566 (100 Index, 2.8 pcf) | Covestro - PUR | PUR-Ether/MDI | Bayfit® |
| Delta ABS 780 | Delta Polymers | ABS | Delta |
| EPDM 430 | The Dow Chemical Company | EPDM | EPDM |
