Order Products : sales@su-jiao.com
Resilience™ LS11001E
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Resilience™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qQtPAQ_ResilienceLS11001E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Resilience™LS11001E is a rigid polyvinyl chloride product,. It can be processed by extrusion and is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Typical application areas are: lighting equipment. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.42 | g/cm³ | ASTM D792 |
| PVC Cell Classification | 13364 | ASTM D1784 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 83 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 3300 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 44.7 | MPa | ASTM D638 |
| Flexural Modulus | 3100 | MPa | ASTM D790 |
| Flexural Strength | 83.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| Transverse flow : 23°C, 3.18mm, molded | 190 | J/m | ASTM D256A |
| Flow : 23°C, 3.18mm, molded | 200 | J/m | ASTM D256A |
| Drop Impact Resistance | ASTM D4226 | ||
| 23°C 3 | 64.9 | J/cm | ASTM D4226 |
| 23°C 4 | 159 | J/cm | ASTM D4226 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.18 mm) | 70.0 | °C | ASTM D648 |
| CLTE - Flow | 6.3E-5 | cm/cm/°C | ASTM D696 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.9 mm, ALL | V-0 | UL 94 | |
| 1.5 mm, ALL | 5VA | UL 94 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Ease of Sizing | Good |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 182 - 193 | °C |
| Note Message | |
|---|---|
| 1 . | Type 1, 5.1 mm/min |
| 2 . | Type 1, 5.1 mm/min |
| 3 . | Program A, C.125 Dart |
| 4 . | Program B, C.125 Dart |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris ABS LHT811 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| Sylvin 86001-75 Clear 876 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Axiall PVC 19802 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| Daelim Po1y® LH-402 | DAELIM INDUSTRIAL CO., LTD. | HDPE | Daelim Po1y® |
| Grivory® GVX-65 H nat | EMS-GRIVORY | Nylon 66+Nylon 6I/X | Grivory® |
