Order Products : sales@su-jiao.com
Shinko-Lac® ASA TA-35
| Category: | ASA+PC , Acrylonitrile Styrene Acrylate + PC |
| Manufacturer: | Mitsubishi Rayon America Inc. |
| Trademark: | Shinko-Lac® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qK02hu_Shinko-Lac-ASA-TA-35.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Shinko-Lac®ASA TA-35 is an acrylonitrile-styrene-acrylate PC (ASA PC) material,. This product is available in North America and is processed by injection molding. Shinko-Lac®The main characteristics of ASA TA-35 are: impact resistance. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 0.50 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.55 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 100 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 44.1 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 1860 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 64.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 780 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, 6.35mm, injection molding | 131 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 6.35mm, injection molding | 114 | °C | ASTM D648 |
| Vicat Softening Temperature | 126 | °C | ISO 306/B |
| Additional Information |
|---|
| Spiral Flow Length, MRC Test, 2t, 240°C, 1000 kg: 260 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NOVALAC RX®831 | Vyncolit N.V. | Phenolic | NOVALAC |
| ALTECH® PA6 A 4230/100 MR20 GF10 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| KumhoSunny PBT/ABS HBG5723FR | Shanghai KumhoSunny Plastics Co., Ltd. | ABS+PBT | KumhoSunny PBT/ABS |
| KEBAFLEX® S 35 A.01 | BARLOG plastics GmbH | TES | KEBAFLEX® |
| TORZEN® G3000HSL BK20 | INVISTA Engineering Polymers | Nylon 66 | TORZEN® |
