Order Products : sales@su-jiao.com
NEALID XG307 - 3220
| Category: | Nylon 6+PP , Polyamide 6 + PP |
| Manufacturer: | AD majoris |
| Trademark: | NEALID |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qH3Vnm_NEALID-XG307---3220.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NEALID XG307-3220 is an alloy of PA6/PP with 30% short glass fibre with UV protection and developed for injection moulding. APPLICATIONS NEALID XG307-3220 is designed for very demanding applications in electrical parts and requiring excellent balance on thermal and mechanical properties. NEALID XG307-3220 is also available in other colours on request. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.28 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | 0.40 to 0.90 | -- | % | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 1.0 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 8500 | 7800 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 180 | 160 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.0 | 5.5 | % | ISO 527-2 |
| Flexural Modulus | 7600 | 7000 | MPa | ISO 178 |
| Flexural Stress | 175 | -- | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -20°C | -- | 9.0 | kJ/m² | |
| 23°C | 13 | 14 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -20°C | -- | 30 | kJ/m² | |
| 23°C | 41 | 45 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 200 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 186 | -- | °C | ISO 75-2/A |
| Melting Temperature (DSC) | 220 | -- | °C | ISO 3146 |
| CLTE - Flow | 2.7E-5 | -- | cm/cm/°C | ISO 11359-2 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+15 | 1.0E+15 | ohms | DIN 53482 |
| Volume Resistivity | 1.0E+15 | 1.0E+15 | ohms·cm | DIN 53482 |
| Comparative Tracking Index (Solution A) | 600 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (1.60 mm) | HB | -- | UL 94 | |
| Glow Wire Flammability Index (2.00 mm) | 650 | -- | °C | IEC 60695-2-12 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 245 to 265 | °C | |
| Middle Temperature | 250 to 270 | °C | |
| Front Temperature | 255 to 275 | °C | |
| Nozzle Temperature | 255 to 275 | °C | |
| Mold Temperature | 40.0 to 80.0 | °C | |
| Injection Pressure | 85.0 to 110 | MPa | |
| Injection Rate | Fast | ||
| Holding Pressure | 50.0 to 70.0 | MPa | |
| Screw L/D Ratio | 15.0:1.0 to 20.0:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHLEN ST920 | DAEHA Co., LTD | PP, Unspecified | TECHLEN |
| NatureFlex™ 125NPU | Innovia Films Ltd. | Cellulose, Regenerated | NatureFlex™ |
| Ferro PP TPP40AC50HB-BK | Ferro Corporation | PP, Unspecified | Ferro PP |
| Iupilon® MB2112 | Mitsubishi Engineering-Plastics Corp | PC+Polyester | Iupilon® |
| KMI PP KM-023IB | KMI Group, Inc. | PP Impact Copolymer | KMI PP |
