Order Products : sales@su-jiao.com

Pebax® MV 1074 SP 01

Category:	PEBA-Ether , Polyether Block Amide
Manufacturer:	Arkema
Trademark:	Pebax®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	qGnDOC_Pebax-MV-1074-SP-01.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Polyether block amide Pebax® MV 1074 SP 01 is a thermoplastic elastomer made of flexible and hydrophilic polyether and rigid polyamide.

Pebax® MV 1074 SP 01 is an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part.

This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof.

This SP grade has been developed to be heat and UV resistant.

General Information
Additive	Antistatic
Features	Antistatic Good UV Resistance Hydrophilic Medium Heat Resistance
Uses	Blending Compounding Membranes
Processing Method	Compounding Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.07	g/cm³	ISO 1183
Water Absorption			ISO 62
23°C, 24 hr	48	%
Equilibrium, 23°C, 50% RH	1.4	%

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	40		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break)	30.0	MPa	ISO 527-2
Tensile Strain (Break)	> 700	%	ISO 527-2
Flexural Modulus	80.0	MPa	ISO 178

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	158	°C	ISO 11357-3

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	3.0E+9	ohms	IEC 60093
Volume Resistivity	2.5E+9	ohms·cm	IEC 60093
Charge Decay Time	< 1.0	sec	MIL B-81705

Optical	Nominal Value		Test Method
Refractive Index	1.502		Internal Method

Injection	Nominal Value	Unit
Drying Temperature	65.0 to 75.0	°C
Drying Time	4.0 to 6.0	hr
Processing (Melt) Temp	200 to 270	°C
Mold Temperature	25.0 to 60.0	°C

Extrusion	Nominal Value	Unit
Drying Temperature	65.0 to 75.0	°C
Drying Time	4.0 to 6.0	hr
Melt Temperature	210 to 230	°C

Resin Grade	Manufacturer	Category	Trademark
Alkadyne™ MD0898-1	Qenos Pty Ltd	MDPE	Alkadyne™
ELASTOSIL® LR 3070/60 A/B	Wacker Chemie AG	Silicone	ELASTOSIL® LR
Glastic® FHT	Glastic Corporation	Polyester, TS	Glastic®
TechnoFiber PP LGF 20-10-01 H	TechnoCompound GmbH	PP, Unspecified	TechnoFiber
Riblene® FL 23 I	Versalis S.p.A.	LDPE	Riblene®