Order Products : sales@su-jiao.com
UBE Polyethylene R300
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UBE Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qGgDq2_UBE-Polyethylene-R300.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UBE Polyethylene R300 is a Polyethylene material. It is available in North America. Primary attribute of UBE Polyethylene R300: Good Toughness. Typical application of UBE Polyethylene R300: Engineering/Industrial Parts |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 0.35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 54 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 21.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 750 | % | ASTM D638 |
| Apparent Bending Modulus | 150 | MPa | ASTM D747 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 93.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Toughblend® PA6-1300 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | Nylon 6 | Toughblend® |
| Yanshan PE LD361 | SINOPEC Beijing Yanshan Petrochemical | LDPE | Yanshan PE |
| Naxel PC502 | Custom Resins Group | PC | Naxel |
| BFI Conductive Film | Blueridge Films Inc. | PE, Unspecified | BFI |
| Edgetek™ AT-25CF/000 BK001 | PolyOne Corporation | Acetal (POM) Copolymer | Edgetek™ |
