Order Products : sales@su-jiao.com
Glastic® 2450-15
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Glastic Corporation |
| Trademark: | Glastic® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qGbtVv_Glastic-2450-15.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Glastic 2450-15 is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 2450-15 features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 2450-15 are higher than those of conventional plastic insulators. Glastic 2450-15 should not be used upside down if there is a possibility of the center hole being filled with water. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| UL File Number |
|
| Forms |
|
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 34.5 | MPa | ASTM D638 |
| Compressive Strength | 138 | MPa | ASTM D695 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Arc Resistance | 180 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Additional Information |
|---|
| Cantilever Strength: 10000in/lbsTorque Strength: 285 ft/lbsHeight Tolerance: .015Creep Resistance: 7 inchDry Hi-Pot, NEMA Specs: 36000 VoltsDew Hi-Pot, NEMA Specs: 26000 VoltsImpulse, 1.5 x 40 wave: 95000Track Resistance: 600 min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC X3559 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| RTP 299 H X 72279 A NATURAL | RTP Company | Nylon 66 | RTP |
| YUZEX® 7302 | SK Global Chemical | HDPE | YUZEX® |
| Durethan® AC 30 DUS027 000000 | LANXESS Asia/Pacific | Nylon 66 | Durethan® |
| ESENTTIA 08C01T | Polipropileno del Caribe S.A. | PP Impact Copolymer | ESENTTIA |
