Order Products : sales@su-jiao.com
Alpha PVC GW 2463-H-VW1 NATURAL LCF
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qGNiBZ_Alpha-PVC-GW-2463-H-VW1-NATURAL-LCF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A LEAD FREE, 105 C DEGREE, FLAME RETARDED, THIN WALL RIBBON CABLE INSULATION. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.35 to 1.41 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore D | 57 to 63 | ||
| Shore D, 15 sec | 42 to 48 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D412 | ||
| 0.762 mm | 20.0 | MPa | |
| 1.91 mm | 17.9 | MPa | |
| Tensile Elongation | ASTM D412 | ||
| Break, 1.91 mm | 320 | % | |
| Break, 0.762 mm | 280 | % |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 1(136°C, 168 hr) | 0.0 | % | UL Unspecified |
| Change in Ultimate Elongation in Air 2(136°C, 168 hr) | -20 | % | UL Unspecified |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -18.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | ASTM D257 | ||
| 23°C 3 | 1.5E+14 | ohms·cm | |
| 23°C 4 | 2.0E+14 | ohms·cm |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 28 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 177 to 188 | °C |
| Note Message | |
|---|---|
| 1 . | Thickness: 30 mil |
| 2 . | Thickness: 30 mil |
| 3 . | Wet |
| 4 . | Dry |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Riblene® FC 40 | Versalis S.p.A. | LDPE | Riblene® |
| ResMart Ultra TPU 95A Ether | ResMart | TPU-Polyether | ResMart Ultra |
| AKROMID® S3 1 black (3317) | AKRO-PLASTIC GmbH | Nylon 610 | AKROMID® |
| Bergamid™ B70 GK25 NC002 | PolyOne Corporation | Nylon 6 | Bergamid™ |
| PENTAMID AB S GV60 H black | PENTAC Polymer GmbH | Nylon 66/6 | PENTAMID AB |
