Order Products : sales@su-jiao.com
NILAMID® XT6 GF30
| Category: | PPA , Polyphthalamide |
| Manufacturer: | Nilit Plastics |
| Trademark: | NILAMID® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qG9X5T_NILAMIDXT6GF30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
SPECIALTY PPA COMPOUND
PPA, 30% GLASS FIBER REINFORCED, HEAT STABILIZED |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.41 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | ||
| Transverse flow : 23°C | 0.70 | % | ISO 294-4 |
| Flow : 23°C | 0.30 | % | ISO 294-4 |
| Water Absorption (Saturation, 23°C) | 0.30 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 11500 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 150 | MPa | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 7.2 | kJ/m² | ISO 179/1eA |
| 23°C | 7.5 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C | 35 | kJ/m² | ISO 179/1eU |
| 23°C | 45 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact (23°C) | 8.0 | kJ/m² | ISO 180/A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1(1.8 MPa, Unannealed) | 275 | °C | ISO 75-2/A |
| Continuous Use Temperature 2 | 140 | °C | IEC 60216 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 1.0E+15 | ohms·cm | IEC 60093 |
| Dielectric Strength (2.00 mm) | 21 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index (3.20 mm, Solution A) | 550 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.40 mm | HB | UL 94 | |
| 0.8 mm | HB | UL 94 | |
| 1.6 mm | HB | UL 94 | |
| 3.2 mm | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | Method B |
| 2 . | 2000 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ranger PBT PBT-201-G20 272 | Beijing Ranger Chemical Co., Ltd. | PBT | Ranger PBT |
| TUFNYL® SST 35 BLACK | SRF Ltd. | Nylon 6 | TUFNYL® |
| UBE Nylon 1022 C2 | UBE Engineering Plastics, S.A. | Nylon 6 | UBE Nylon |
| Devcon Plastic Steel® Liquid (B) | Devcon | Epoxy | Devcon |
| Fainplast PVC PM 7516 | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
