Order Products : sales@su-jiao.com
SEETEC LLDPE UF914
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Lotte Chemical Corporation |
| Trademark: | SEETEC LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qBCgyx_SEETEC-LLDPE-UF914.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UF914 is a melt blend grade for blown film applications. UF914 has good optical properties and good processability. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.1 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 40 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Break, 40 µm, Blown Film | 38.7 | MPa | |
| TD : Break, 40 µm, Blown Film | 36.8 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 40 µm, Blown Film | 700 | % | |
| TD : Break, 40 µm, Blown Film | 720 | % | |
| Dart Drop Impact (40 µm, Blown Film) | 120 | g | ASTM D1709 |
| Elmendorf Tear Strength 1 | ASTM D1922 | ||
| MD : 40.0 µm | 44.1 | kN/m | |
| TD : 40.0 µm | 88.3 | kN/m |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 40.0 µm, Blown Film) | 75 | ASTM D2457 | |
| Haze (40.0 µm, Blown Film) | 7.5 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | Blown Film |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 2900-93 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| TABOND 5006 | SILON s.ro | PP, Unspecified | TABOND |
| Moplen HP421H | LyondellBasell Industries | PP Homopolymer | Moplen |
| Hydrin® C2000L | Zeon Chemicals L.P. | Epoxy | Hydrin® |
| INLUBE PEEKGF30TF15 | Infinity LTL Engineered Compounds | PEEK | INLUBE |
