Order Products : sales@su-jiao.com
Therma-Tech™ X TT9200-8708 EC
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Therma-Tech™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | q82ENh_Therma-Tech-X-TT9200-8708-EC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Therma-Tech™ Thermal Management Compounds have been engineered to combine the heat transfer and cooling capabilities of metals with the design freedom, weight reduction and cost advantages of thermoplastics. These materials provide the benefits of proprietary conductive additive technologies and the performance of select engineering thermoplastic resins. Therma-Tech compounds have been shown to improve thermal conductivity up to 100-times that of conventional plastics and can be used in a wide range of thermal management applications. |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.74 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1(3.20 mm) | 27600 | MPa | ASTM D638 |
| Tensile Strength 2(3.20 mm) | 55.2 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, 3.20 mm) | 0.40 | % | ASTM D638 |
| Flexural Modulus (3.20 mm) | 22100 | MPa | ASTM D790 |
| Flexural Strength (3.20 mm) | 82.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm) | 27 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal Conductivity | ASTM E1461 | ||
| -- 4 | 4.0 to 5.0 | W/m/K | |
| -- 5 | 18 to 20 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+2 to 9.0E+3 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | V-0 | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 140 to 150 | °C | |
| Drying Time | 4.0 to 6.0 | hr | |
| Processing (Melt) Temp | 320 to 340 | °C | |
| Mold Temperature | 140 to 160 | °C |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | Through-Plane |
| 5 . | In-Plane |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRIMALENE WPP733 | Southern Polymer, Inc. | HDPE | PRIMALENE |
| TEREZ PA 6 7400 GK 50 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| Xuchuan A-9190/B-8290 | Xuchuan Chemical (Suzhou) Co., Ltd | TPU-Polyester | Xuchuan |
| Fainplast PVC MPH 75 | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| Geon™ Duracap™ L4605 Red 7640 | PolyOne Corporation | PVC, Semi-Rigid | Geon™ Duracap™ |
