Order Products : sales@su-jiao.com
NYCOA Polyamide 3340 UV HS
| Category: | Nylon+PP , Polyamide + PP |
| Manufacturer: | Nycoa (Nylon Corporation of America) |
| Trademark: | NYCOA Polyamide |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | q74WGC_NYCOA-Polyamide-3340-UV-HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NYCOA 3340 UV HS is a flexible Nylon copolymer/ Polypropylene alloy that has been developed for both injection molding and extrusion applications. The chemical composition of NYCOA 3340 promotes good adhesion to polyolefins and other materials, without the problem of migration associated with the use of plasticizers. In addition, its high melt viscosity and melt strength provides outstanding processability for tubing, profile, film, and sheet. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.948 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 68 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 28.3 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 90 | % | ASTM D638 |
| Flexural Modulus 3 | 869 | MPa | ASTM D790 |
| Flexural Strength 4 | 30.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (6.35 mm) | 320 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 205 | °C | DSC |
| Additional Information |
|---|
| The value listed as Melting Point DSC, was tested in accordance with ASTM D789. |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wondel® S SN0P | Nanjing Julong Engineering Plastics Co., LTD | ABS | Wondel® S |
| APICAL 50AV | Kaneka Corporation | PI, TS | APICAL |
| Enviramid® N1360HL BK | Ravago Manufacturing Americas, LLC | Nylon 66 | Enviramid® |
| ISORENE™ A3-1001 | SABIC Innovative Plastics Europe | TPE | ISORENE™ |
| LUBEMID B27 GF20 NATURAL | LUBEN PLAST srl | Nylon 6 | LUBEMID |
