Order Products : sales@su-jiao.com

Nylene® 826

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Custom Resins Group
Trademark:	Nylene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	q6drlg_Nylene-826.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Nylon 6 based copolymer suitable for both blown and cast film coextrusion

Lower melting point and is less crystalline than nylon 6

Excellent toughness, chemical resistance, transparency, and low oxygen permeability

Films made using Nylene 826 exhibit superior deep draw characteristics

Because Nylene 826 is polymerized using a continuous process, it has good lot-to-lot consistency.

General Information
Features	Copolymer Good Chemical Resistance Good Toughness
Uses	Cast Film Film
Processing Method	Blown Film Cast Film Coextrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.11	g/cm³	ASTM D792
Relative Viscosity	75		ASTM D789

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	335	MPa	ASTM D638
Tensile Strength			ASTM D638
Yield, 23°C	25.0	MPa
Break, 23°C	58.0	MPa
Ultimate, 23°C	55.0	MPa
Tensile Elongation (Break, 23°C)	340	%	ASTM D638

Films	Nominal Value	Unit	Test Method
Oxygen Permeability (24°C)	1.5	cm³·mm/m²/atm/24 hr	ASTM D3985

Thermal	Nominal Value	Unit	Test Method
Peak Melting Temperature	195	°C	ASTM D789

Extrusion	Nominal Value	Unit
Melt Temperature	227 to 260	°C
Die Temperature	227 to 260	°C

Resin Grade	Manufacturer	Category	Trademark
Viprene™ P65A-22U-NAT	Alliance Polymers & Services	TPV	Viprene™
Zeoforte® ZSC 4195CX	Zeon Chemicals L.P.	NBR	Zeoforte®
apilon 52c® C 61HV	API SpA	TPU-Polyester	apilon 52c®
Aristech Altair® I-300	Aristech Acrylics LLC	Acrylic, Unspecified	Aristech
Fixmaster NC Super Metal	Loctite®	Epoxy	Fixmaster