Order Products : sales@su-jiao.com
OXNILON 66 20PTFE
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Oxford Polymers |
| Trademark: | OXNILON 66 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | q5Q3D9_OXNILON-66-20PTFE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
OXNILON 66 20PTFE is a Polyamide 66 (Nylon 66) material. It is available in North America for injection molding. Important attributes of OXNILON 66 20PTFE are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.25 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 1.5 | % | ASTM D955 |
| Water Absorption (Saturation) | 7.0 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 58.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 9.0 | % | ASTM D638 |
| Flexural Modulus | 2240 | MPa | ASTM D790 |
| Flexural Strength | 86.2 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 48 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 104 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Rear Temperature | 274 to 282 | °C | |
| Middle Temperature | 277 to 288 | °C | |
| Front Temperature | 282 to 293 | °C | |
| Nozzle Temperature | 282 to 293 | °C | |
| Processing (Melt) Temp | 277 to 299 | °C | |
| Mold Temperature | 65.6 to 107 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 207 D MS | RTP Company | Nylon 612 | RTP |
| BESTNYL SI20VI02AU | Triesa Plastics | Nylon 6 | BESTNYL |
| Clearflex® H&T CMH 108 | Versalis S.p.A. | LLDPE | Clearflex® H&T |
| Emulprene® 261 | INSA | SBR, Emulsion | Emulprene® |
| OTECH TPO OTR4288-Molding | OTECH Corporation | TPE | OTECH TPO |
