Order Products : sales@su-jiao.com

ISPLEN® PB 141 U5M

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	REPSOL
Trademark:	ISPLEN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	q15VOg_ISPLEN-PB-141-U5M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

ISPLEN® PB 141 U5M is a low-medium fluidity heterophasic copolymer with specific structural modifications Intended for injection moulding applications that combines very high impact strength, even at low temperatures, and high stiffness and good processability. It is UV stabilized to be used in exterior applications.

Among other technical advantages ISPLEN® PB 141 U5M offers:

Highly suitable for manufacturing of articles with high strength at very low temperatures.

Easy flow enables to fill moulds with complex geometry or big articles that is not common in a grade with this melt flow rate.

Low warpage and high dimensional stability.

TYPICAL APPLICATIONS
ISPLEN® PB 141 U5M characteristics performs a grade particularly designed for technical components and containers exposed to heavy loads: heavy duty crates, suitcase shells, professional organizers, automotive components, extra high impact battery boxes and industrial components (sports, leisure, packaging...)

Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

General Information
Additive	UV Stabilizer
Features	Food Contact Acceptable Good Dimensional Stability Good Moldability Good Processability High Stiffness Low Temperature Impact Resistance Low Warpage Medium Flow Ultra High Impact Resistance
Uses	Automotive Applications Battery Cases Crates Industrial Applications Luggage Outdoor Applications Packaging Sporting Goods
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	3.5	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	62		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus	1250	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	15	kJ/m²	ISO 179

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	82.0	°C	ISO 75-2/B

Injection	Nominal Value	Unit
Processing (Melt) Temp	190 to 250	°C

Resin Grade	Manufacturer	Category	Trademark
SOLARENE DH200	Dongbu Hannong Chemical	PS (GPPS)	SOLARENE
Tarnoform® 300 SO	Grupa Azoty S.A.	Acetal (POM) Copolymer	Tarnoform®
THERMOLAST® V TV9LVZ (Series: LTP)	KRAIBURG TPE	SEPS	THERMOLAST® V
Delrin® PC690 NC010	DuPont Performance Polymers	Acetal (POM) Homopolymer	Delrin®
Sylvin 9077-85 Grey 9398	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin