Order Products : sales@su-jiao.com
Nylene® NX-1440C
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Custom Resins Group |
| Trademark: | Nylene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | q0t6sS_Nylene-NX-1440C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Medium viscosity, fast cycle molding resin. Crystallization initiators provide fast molding cycles through rapid melt set-up. Parts molded from NX1440 have better dimensional stability at moisture equilibrium than parts molded from conventional nylon. Suitable for such uses as clips and fasteners, bushings, small levers, gears, and window hardware. Optimum processing conditions should provide a melt temperature of 460 - 480°F at the nozzle. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.90 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 75.2 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 25 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2900 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 43 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 82.2 | °C | ASTM D648 |
| Peak Melting Temperature | 216 | °C | ASTM D3418 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 238 to 249 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnoform® 300 GF2GB2 | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| Unichem 9855 | Colorite Polymers | PVC, Unspecified | Unichem |
| Bergadur™ PB40 G45 BK006 | PolyOne Corporation | PBT | Bergadur™ |
| CALIBRE™ IM 401-11 | Trinseo | PC | CALIBRE™ |
| CYCOLAC™ MG37EPX resin | SABIC Innovative Plastics | ABS | CYCOLAC™ |
