TECOLITE KM-727JK

Category: Phenolic , Phenolic
Manufacturer: KYOCERA Chemical Corporation
Trademark: TECOLITE
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: puzQaa_TECOLITE-KM-727JK.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Provides wide range moldability and Superior cost performance and Expands the possibility of design.

Kyocera Chemical's Phenolic Molding Compounds "TECOLITE" can possible to high cycle molding and excellent stability within a cylinder. Moreover, "TECOLITE" have a wide molding condition and can be found out easily. In the parts, "TECOLITE" have small mold shrinkage factor therefore it is suitable for precision parts. It is especially the best for mass-production parts, such as a non-fuse breaker, various electric parts, and kitchen parts, etc.
General Information
Features
  • Fast Cure
  • Low Shrinkage
Uses
  • Electrical/Electronic Applications
  • Kitchenware
Appearance
  • Black
PhysicalNominal ValueUnit
Specific Gravity 1.43g/cm³
Molding Shrinkage 1
    Flow 1.2 to 1.4%
    Across Flow 1.0 to 1.2%
Water Absorption (Equilibrium)< 0.35%
MechanicalNominal ValueUnit
Flexural Strength 78.0 to 98.0MPa
Compressive Strength 216 to 245MPa
ThermalNominal ValueUnit
Heat Deflection Temperature 173°C
ElectricalNominal ValueUnitTest Method
Insulation Resistance
    After Boiling 1.0E+8 to 1.0E+9ohms
    As Molded 1.0E+10 to 1.0E+11ohms
Dielectric Strength > 10kV/mm
FlammabilityNominal ValueUnitTest Method
Flame Rating HBUL 94
Note Message
1 .Injection Molding
Resin Grade Manufacturer Category Trademark
Vibrathane® B615 Chemtura PUR-Ether/TDI Vibrathane®
TEREZ PA 6 7630 TER HELL PLASTIC GMBH Nylon 6 TEREZ PA 6
CoolPoly® E1201 Celanese Corporation PP, Unspecified CoolPoly®
KRATON® D1101 K Kraton Polymers LLC SBS KRATON®
LEXAN™ 505RU resin SABIC Innovative Plastics PC LEXAN™