Order Products : sales@su-jiao.com
MARPOL® HDM 504-RC
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Marco Polo International, Inc. |
| Trademark: | MARPOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | psdygm_MARPOLHDM504RC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description: MARPOL® HDM 504-RC is a post-consumer HDPE resin Processing: Injection molding |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Recycled Content |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 20.7 | MPa | ASTM D638 |
| Flexural Modulus | 896 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 110 | J/m | ASTM D256 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Weight Loss on Heating - Moisture 1(105°C) | 0.010 | % |
| Note Message | |
|---|---|
| 1 . | KW-MA-1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RABALON® SJ5300C | Mitsubishi Chemical Performance Polymers, Inc. | TPE | RABALON® |
| SITRASAC 6E / C7045 telegrau | SITRAPLAS GmbH | ASA | SITRASAC |
| Trademark PE LD2920B | Trademark Plastics Corporation | LDPE | Trademark PE |
| Diamond EPS EP-100 | Diamond Polystyrene | PS (EPS) | Diamond EPS |
| Huafon EP158N | Huafon Group Co., Ltd. | Nylon 66 | Huafon |
