Order Products : sales@su-jiao.com

Formolene® 4181T

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Formosa Plastics Corporation, U.S.A.
Trademark:	Formolene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	prkiIM_Formolene-4181T.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Formolene® 4181T is a low viscosity, polypropylene homopolymer designed for general purpose injection molded applications such as closures. It contains a unique combination of stabilizers which give it excellent processability with high stiffness, heat performance and good organoleptics. Formolene® 4181T contains antistat but no nucleation. Formolene® 4181T meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. For additional information on approved conditions of use for food contact applications, please refer to the "Products" section on our web site (http://www.fpcusa.com/ourproducts.html).

Message

Formolene® 4181T is a low viscosity, polypropylene homopolymer designed for general purpose injection molded applications such as closures. It contains a unique combination of stabilizers which give it excellent processability with high stiffness, heat performance and good organoleptics. Formolene® 4181T contains antistat but no nucleation.
Formolene® 4181T meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. For additional information on approved conditions of use for food contact applications, please refer to the "Products" section on our web site (http://www.fpcusa.com/ourproducts.html).

General Information
Additive	Antistatic Processing Stabilizer
Features	Antistatic Good Organoleptic Properties Good Processability High Stiffness Low Viscosity
Uses	General Purpose
Agency Ratings	FDA 21 CFR 177.1520
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	30	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	34.5	MPa	ASTM D638
Tensile Elongation ²(Yield)	9.0	%	ASTM D638
Flexural Modulus - 1% Secant ³	1240	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	21	J/m	ASTM D256

Note Message
1 .	50 mm/min
2 .	50 mm/min
3 .	1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
QR Resin QR-5000	QTR, Inc.	PEI	QR Resin
Unichem 6012G-05	Colorite Polymers	PVC, Unspecified	Unichem
NYCOA Polyamide 571 HS	Nycoa (Nylon Corporation of America)	Nylon 6	NYCOA Polyamide
DINALON® PA 6 ESPECIAL IMPACTO ALTO	Grupo Repol	Nylon 6	DINALON®
POLYfill PPH TS8030	Polykemi AB	PP Homopolymer	POLYfill