Order Products : sales@su-jiao.com
Kingfa ABP-2119
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Kingfa |
| Trademark: | Kingfa |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | prLDRd_Kingfa-ABP-2119.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Kingfa ABP-2119 is a Polypropylene material. It is available in Asia Pacific or North America. Important attributes of Kingfa ABP-2119 are:
Typical application of Kingfa ABP-2119: Automotive |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 9.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (23°C) | 1.4 to 1.6 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 65 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(23°C, Injection Molded) | 18.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 23°C, Injection Molded) | 400 | % | ASTM D638 |
| Flexural Modulus 3(23°C, Injection Molded) | 800 | MPa | ASTM D790 |
| Flexural Strength 4(23°C, Injection Molded) | 23.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C, 3.20 mm, Injection Molded | 60 | J/m | |
| 23°C, 3.20 mm, Injection Molded | 550 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 6.40 mm, Injection Molded | 105 | °C | |
| 1.8 MPa, Unannealed, 6.40 mm, Injection Molded | 52.0 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.20 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 2.0 mm/min |
| 4 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Pro PP-COCC-30GF | Pro Polymers | PP Copolymer | Pro-Comp™ |
| Dryflex® A1 602901 | ELASTO | SEBS | Dryflex® |
| FERREX® GPP20CK16HB-BK | Ferro Corporation | PP, Unspecified | FERREX® |
| Plaslube® J-80/20/TF/15 BK223 | Techmer Engineered Solutions | Acetal (POM) Copolymer | Plaslube® |
| CYCOLOY™ CY6310 resin | SABIC Innovative Plastics | PC+ABS | CYCOLOY™ |
