Order Products : sales@su-jiao.com
KW Plastics KWR101-150-M5 BLK
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | KW Plastics |
| Trademark: | KW Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | prAzVB_KW-Plastics-KWR101-150-M5-BLK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Medium Density Polyethylene Post-Consumer Resin Extrusion CHARACTERISTICS Good impact resistance, good Flexibility, pre-colored black. |
| General Information | |
|---|---|
| Recycled Content |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.955 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.55 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 51 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 23.4 | MPa | ASTM D638 |
| Flexural Modulus | 965 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Polypropylene | < 2.0 | % | ASTM D5576 |
| Weight Loss on Heating (105°C) | < 0.10 | % | Internal Method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| STERalloy™ FDG 2056-5 | Hapco Inc. | TP, Unspecified | STERalloy™ FDG |
| Adell Polyamide AS-10 | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| Bayflex® 110-35 | Covestro - PUR | PUR-Ether/MDI | Bayflex® |
| Kostrate® EDGE HB | Plastic Selection Group, Inc. | TP, Unspecified | Kostrate® EDGE |
| Sylvin 9604-80 Clear 8478 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
