Order Products : sales@su-jiao.com
Multi-Pro® 3010 X
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Multibase, A Dow Corning Company |
| Trademark: | Multi-Pro® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ppVgWx_Multi-Pro-3010-X.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Multi-Pro® 3010 X is a Polypropylene product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: heat resistant. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.1 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 55.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 20 | % | ISO 527-2 |
| Flexural Modulus | 4400 | MPa | ISO 178 |
| Flexural Stress | 80.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | 5.0 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 68.3 | °C | |
| 1.8 MPa, Unannealed | 57.8 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 210 | °C | |
| Middle Temperature | 216 | °C | |
| Front Temperature | 221 | °C | |
| Nozzle Temperature | 227 | °C | |
| Processing (Melt) Temp | 227 | °C | |
| Mold Temperature | 32.2 to 48.9 | °C | |
| Injection Rate | Moderate-Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NORDEL™ IP 3722P EL | The Dow Chemical Company | EPDM | NORDEL™ |
| Dutral® TER 4038 EP | Versalis S.p.A. | EPDM | Dutral® |
| MAJORIS DT267 | AD majoris | PP, Unspecified | MAJORIS |
| Hylex® P1317L1 | Entec Polymers | PC | Hylex® |
| TechnoElast D 5000 I 1 nat | TechnoCompound GmbH | TPE | TechnoElast |
