Order Products : sales@su-jiao.com
Generic Phenolic - Cellulose
| Category: | Phenolic , Phenolic |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ppO4ay_Generic-Phenolic---Cellulose.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Phenolic - Cellulose This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.37 - 1.45 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.19 - 0.40 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.28 - 0.61 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 65 - 115 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 40.8 - 48.3 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 6950 - 9030 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 68.3 - 76.0 | MPa | ASTM D790 |
| Compressive Strength (23°C) | 103 - 194 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 17 - 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 159 - 191 | °C | ASTM D648 |
| CLTE - Flow | 1.0E-5 - 6.7E-5 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity (23°C) | 0.29 - 0.64 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength (23°C) | 0.98 - 12 | kV/mm | ASTM D149 |
| Arc Resistance | 15.0 - 177 | sec | ASTM D495 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 60.0 - 60.4 | °C | |
| Nozzle Temperature | 87.8 - 98.9 | °C | |
| Processing (Melt) Temp | 104 - 107 | °C | |
| Mold Temperature | 166 - 177 | °C | |
| Back Pressure | 0.300 - 10.0 | MPa |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic Phenolic - CelluloseThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecodur® PB70 GB30 NL | Eurotec Engineering Plastics | PBT | Tecodur® |
| Elastollan® B 60 A ESD M | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
| Elvakon® 4474 | Lucite International Inc. | Acrylic (PMMA) | Elvakon® |
| KPOL-PP K-PHC 13.0 B | KPOL Chem Co. | PP, Unspecified | KPOL-PP |
| LONGLITE® PET 9030-200 | CCP Group | PET | LONGLITE® PET |
