Plenco 01586 (Injection) Datasheet,Polyester, TS,Plastics Engineering Co.-SHANGHAI SUSHENG

Message
PLENCO 01586 is a glass and mineral reinforced pelletized polyester molding compound offering excellent heat resistance and mechanical strength properties. This product is typically used for injection molded electrical appliance components. UL recognized under component file E40654. 01586 is available in white, yellow, or grey colors.

General Information
Filler / Reinforcement	Glass fiber reinforced material Mineral filler
Features	Good strength Heat resistance, high
Uses	Electrical components Home appliance components
UL File Number	E40654
Appearance	White Yellow Grey
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.89	g/cm³	ASTM D792
Apparent Density	0.89	g/cm³	ASTM D1895
Molding Shrinkage - Flow	0.37	%	ASTM D955
Water Absorption (24 hr)	0.060	%	ASTM D570

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (E-Scale)	54		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	11700	MPa	ASTM D638
Tensile Strength	64.0	MPa	ASTM D638
Tensile Elongation (Break)	1.1	%	ASTM D638
Flexural Modulus	10300	MPa	ASTM D790
Flexural Strength	101	MPa	ASTM D790
Compressive Strength	119	MPa	ASTM D695

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength	35.1	J/m	ASTM D256
Notched Izod Impact	42	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	253	°C	ASTM D648
Continuous Use Temperature	217	°C	ASTM D794
CLTE - Flow	8.6E-5	cm/cm/°C	ASTM E831
Thermal Conductivity (100°C)	0.87	W/m/K	ASTM C177

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.9E+15	ohms·cm	ASTM D257
Dielectric Strength			ASTM D149
-- ¹	13	kV/mm	ASTM D149
-- ²	11	kV/mm	ASTM D149
Dielectric Constant (1 MHz)	4.40		ASTM D150
Dissipation Factor (1 MHz)	0.017		ASTM D150
Arc Resistance	189	sec	ASTM D495
Comparative Tracking Index (CTI)	600	V	UL 746

Flammability	Nominal Value	Unit	Test Method
Flame Rating (1.00 mm)	V-0		UL 94
Oxygen Index	41	%	ASTM D2863

Additional Information
The value listed as Mold Shrink, Linear-Flow, ASTM D955 was tested according to the ASTM D6289 standard.The value listed as Comparative Tracking Index, UL 746 was tested according to ASTM D3638.The value listed as Thermal Conductivity, ASTM C177 was tested according to the ASTM E1461 standard.Post Shrinkage, ASTM D6289, 72hr, 120°C: 0.01%Heat Resistance, ASTM D794: 217°CDrop Ball Impact, PLENCO Method: 292 J/m

Additional Information

The value listed as Mold Shrink, Linear-Flow, ASTM D955 was tested according to the ASTM D6289 standard.The value listed as Comparative Tracking Index, UL 746 was tested according to ASTM D3638.The value listed as Thermal Conductivity, ASTM C177 was tested according to the ASTM E1461 standard.Post Shrinkage, ASTM D6289, 72hr, 120°C: 0.01%Heat Resistance, ASTM D794: 217°CDrop Ball Impact, PLENCO Method: 292 J/m

Injection	Nominal Value	Unit
Suggested Shot Size	20 - 80	%
Rear Temperature	49.0 - 71.0	°C
Front Temperature	85.0 - 93.0	°C
Processing (Melt) Temp	93.0 - 100	°C
Mold Temperature	163 - 182	°C
Injection Pressure	6.20 - 11.0	MPa
Back Pressure	0.300	MPa
Screw Speed	< 60	rpm
Cushion	3.00	mm

Injection instructions
Injection Time: 3-6 sec

Note Message
1 .	Method A (short time)
2 .	Method B (step by step)

Category:	Polyester, TS , Thermoset Polyester
Manufacturer:	Plastics Engineering Co.
Trademark:	Plenco
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	plykUt_Plenco-01586-Injection-.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Sasol Polymers PP HNR101	Sasol Polymers	PP Homopolymer	Sasol Polymers PP
Telcar® TL-81-D920-A	Teknor Apex Company	TPE	Telcar®
BITONER® C9 H-120	Qingdao Bater Chemical Co., Ltd.	TP, Unspecified	BITONER®
Fiberfil® PP-61/CC/40	Fiberfil® Engineered Plastics Inc.	PP Copolymer	Fiberfil®
Karina ORANGE COLOR CONCENTRATE 32/151-FC-LMP	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina