Order Products : sales@su-jiao.com
NuSil MED-4810
| Category: | Silicone Rubber, LSR , Silicone Rubber, LSR |
| Manufacturer: | NuSil Technology |
| Trademark: | NuSil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pkNv50_NuSil-MED-4810.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days). Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts. LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength. Comments: INJECTION MOLDING ELASTOMER |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength (200% Strain) | 0.310 | MPa |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 1.0 | ||
| Part B | Mix Ratio by Weight: 1.0 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure System | Platinum | ||
| Extrusion Rate | 80.0 | g/min |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.07 | g/cm³ | |
| Curing Time (150°C) | 0.083 | hr | |
| Pot Life (25°C) | > 1400 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 11 | ||
| Tensile Strength | 5.17 | MPa | |
| Tensile Elongation at Break | 1100 | % | |
| Tear Strength | 12.3 | kN/m |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NB40 GR30 NL IM | Eurotec Engineering Plastics | Nylon 6 | Tecomid® |
| TOTAL Polyethylene Lumicene® M 2710 EP (EU) | TOTAL Refining & Chemicals | LLDPE | TOTAL Polyethylene |
| Asiga® PlasCLEAR | Asiga | Unspecified | Asiga® |
| Clariant Nylon 6 PA-211G13 | Clariant Corporation | Nylon 6 | Clariant Nylon 6 |
| INLUBE POMCGF10TF15 | Infinity LTL Engineered Compounds | Acetal (POM) Copolymer | INLUBE |
