Order Products : sales@su-jiao.com
Sumitomo Epoxy E 2748-9641D
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Sumitomo Bakelite North America, Inc. |
| Trademark: | Sumitomo Epoxy |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pisV8g_Sumitomo-Epoxy-E-2748-9641D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| E 2748-9641D is a mineral and short fiberglass filled epoxy molding compound formulated for compliance with FDA regulations governing molded articles used in direct contact with food. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.80 | g/cm³ | ASTM D792 |
| Apparent Density | 0.80 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow (Compression Molded) | 0.20 to 0.40 | % | ASTM D955 |
| Water Absorption - 48 hr (50°C) | 0.15 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, Compression Molded) | 71.0 | MPa | ASTM D638 |
| Flexural Modulus (Compression Molded) | 19000 | MPa | ASTM D790 |
| Flexural Strength (Break) | 145 | MPa | ASTM D790 |
| Compressive Strength | 240 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 31 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 1.8 MPa, Unannealed, Compression Molded | 150 | °C | |
| 1.8 MPa, Annealed, Compression Molded | > 280 | °C | |
| CLTE - Flow | 2.7E-5 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | ASTM D149 | ||
| -- 2 | 15 | kV/mm | |
| -- 3 | 13 | kV/mm | |
| Dielectric Constant 4(1 MHz) | 4.00 | ASTM D2520 | |
| Dissipation Factor 5(1 MHz) | 0.020 | ASTM D150 | |
| Arc Resistance | 180 | sec | ASTM D495 |
| Note Message | |
|---|---|
| 1 . | Wet, 60 Hz |
| 2 . | Method A (Short-Time) |
| 3 . | Method B (Step-by-Step) |
| 4 . | Wet |
| 5 . | Wet |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANBLEND P AP2060 F30B | Polykemi AB | PBT+ASA | SCANBLEND P |
| VICTREX® PEEK 650CA30 | Victrex plc | PEEK | VICTREX® PEEK |
| NEXUS PC PC1212FRRUV | Nexus Resin Group, LLC. | PC | NEXUS PC |
| Nipol® DN171 | Zeon Chemicals L.P. | PVC+NBR | Nipol® |
| PENTAMID AB S L5 H1 natural | PENTAC Polymer GmbH | Nylon 66/6 | PENTAMID AB |
